Ubiquiti NanoStation Loco M2 2 4 GHz 8dBi cene

The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE, The new NanoStation M and NanoStation Loco M take the same concept to the future with new redesigned sleek and elegant form-factors, The Ubiquiti NanoStation M2 Loco is the perfect device to connect networks via WLAN whether it is a WISP or point-to-point bridge, Completely build in a UV stabilized weatherproof case incl, an 8dBi antenna, LAN ports (RJ45) incl, PoE are contained so connections can be in case of free line of sight (LOS) established above 5km, No matter if you want to connect with a faraway WLAN or connect two networks via WLAN the Ubiquiti NanoStation Loco 2 is just the right choice, On the back of the NanoStation is a LED status display which helps to adjust the antenna, Delivery contents: Ubiquiti NanoStation M2 Loco (device) 15 Volt power supply (EU) with integrated PoE-Injector Product Name: Ubiquiti NanoStation M2 Loco 2,4GHz 8dBi NSM2L Processor Specs: Atheros MIPS 24KC 400MHz Memory Information: 32MB SDRAM 8MB Flash Networking Interface: 1 * 10/100 BASE-TX Compliance: FCC Part 15,247 CE IC RS210 RoHS TX Power: max, 23dBm +/-2dB at 11b/g max, 23dBm +/-2dB at 11n RX Sensitivity: min, -83dBm +/-2dB at 11b/g min, -96dBm +/-2dB at 11n Antenna: Integrated 2x2 MiMo dual polarized Beamwidth: H 60 / V 60 TCP/IP Throughput: up to 150MBit/Sec, Max Power Consumption: Max, 55 Watts Power Supply: 24V 0,5A (12 Watts) Power Method: Passive Power over Ethernet (pairs 45+; 78 return) Operating Temperature: -30C to +80C Operating System: AirO V.